turbo
#4
RE: turbo
yeah. you're gonna spend 900 on a good turbo, all the piping and everything will be another 1500 or so. then a 200 dollar tune, and be running 5-7psi.. and with 7psi, you'd be gaining about 100 horse.. that's it.. for almsot 3 grand. to up the boost, you're gonna need new clutch, new pistons, new rods, prolly new crank, new heads, new cam, a intercooler, better driveshaft & rearend. fuel pump, fuel injecters, colder plugs, prolly better fuel lines also. etc etc.
#5
RE: turbo
Email Tiago at http://www.force-fed-fabrications.com/index2.htm
They sell kits. I'm not sure how $6,000 answers your question, but oh well.
They sell kits. I'm not sure how $6,000 answers your question, but oh well.
#6
RE: turbo
http://www.3800stroked.com/upgradedkit2.htm
You can get a stroker kit with forged components, and then on top of that run up to 12 psi of boost. You will make some serious power, and with a turbo running that much boost, you shouldn't need to worry about your heads too much.
You can get a stroker kit with forged components, and then on top of that run up to 12 psi of boost. You will make some serious power, and with a turbo running that much boost, you shouldn't need to worry about your heads too much.
#7
RE: turbo
ORIGINAL: musicman
http://www.3800stroked.com/upgradedkit2.htm
You can get a stroker kit with forged components, and then on top of that run up to 12 psi of boost. You will make some serious power, and with a turbo running that much boost, you shouldn't need to worry about your heads too much.
http://www.3800stroked.com/upgradedkit2.htm
You can get a stroker kit with forged components, and then on top of that run up to 12 psi of boost. You will make some serious power, and with a turbo running that much boost, you shouldn't need to worry about your heads too much.
#8
RE: turbo
nope
ive looked into it
you are looking to spend alot
unless you know what your doing.
ive been told by the mechanic thats guna be doing my turbo
that ill be near 500 horses
dont believe me
well i didnt say it
take it up with him
the guy that does this for a living
your also looking at adding life to your engine
gas mileage if you dont floor it all the time
and the faces on the mustang gt drivers after you get through raping them.
any more questions just ask
i know a little bit about it
ive looked into it
you are looking to spend alot
unless you know what your doing.
ive been told by the mechanic thats guna be doing my turbo
that ill be near 500 horses
dont believe me
well i didnt say it
take it up with him
the guy that does this for a living
your also looking at adding life to your engine
gas mileage if you dont floor it all the time
and the faces on the mustang gt drivers after you get through raping them.
any more questions just ask
i know a little bit about it
#9
RE: turbo
ORIGINAL: dangerjakeray
nope
ive looked into it
you are looking to spend alot
unless you know what your doing.
ive been told by the mechanic thats guna be doing my turbo
that ill be near 500 horses
dont believe me
well i didnt say it
take it up with him
the guy that does this for a living
your also looking at adding life to your engine
gas mileage if you dont floor it all the time
and the faces on the mustang gt drivers after you get through raping them.
any more questions just ask
i know a little bit about it
nope
ive looked into it
you are looking to spend alot
unless you know what your doing.
ive been told by the mechanic thats guna be doing my turbo
that ill be near 500 horses
dont believe me
well i didnt say it
take it up with him
the guy that does this for a living
your also looking at adding life to your engine
gas mileage if you dont floor it all the time
and the faces on the mustang gt drivers after you get through raping them.
any more questions just ask
i know a little bit about it
All this coming from a guy who doesn't know if he can turbo his Camaro or not...
https://camaroforums.com/m_221807/tm.htm
#10
RE: turbo
6,000 USD??????? ...hmm ive had qoutes for last than thatfrom force-fed-fab for around 3500-4000, a guy here in Va for around 3,000 for a custom built kit with all name brand parts with great reps. but those prices arent including labor, but it shouldnt be all that much. needless to say i went local with a shop in my town. my kit pushes 10psi of boost and costed me right under 4,000.