My bolt won't budge on for my transmition any tips would be GREATLY APRECIATED I'm taking out my trany and I can't seem to get the last 4 bolts out *2 conecting near the clutch to the engine* and then 4 holding on the drive train * were it conects to the axle* this has to be takin out to take the trany out ..... I try'd power *air compresser* wrench I can't find a pull to break it lose...... I try'd used oil.....WD-40 assistance from muscular people....soap and water.... um I am SO FRUSTERATED! PLEASE SOMEONE HELP IT WOULD BE GREATLY APRECIATED!

 

Well I would go with PB Blaster for my penatration oil. Sometimes an impact wrench isn't the best option. A longer wrench with a short extention is what I would try. Or I would get a "gator" socket. It has a bunch of needles that conform to the shape of the bolt to prevent rounding.

 

One of my friends taught me years ago to use Mapp Gas heat (not propane not hot enough) and just get it good and hot and use a Household Candlelet it melt then let Itsit a min or so and reheat and apply candleagain then try ....I have used it 100's of times since and It works ..

Let me know

 

gator not sure what that is but that's alright I'll go ask around and see what it is I'll try that candle too! 95maro thanks~ and I try'd the longer wrench with shorter extension.... the thing is its really tight in these places..... Thanks so much everyone!