Converting from manual to power doors
 

Hey guys,

I have my project car to pimp out and one of my next upgrades is power doors. My ride is a 97 3.8, with headers, cold air, alumina drive shaft, 19 inch wheels which won’t go on until after the paint has been laid down…I have a few other things going on the car as well...but anyway...

I grabbed the doors already and I also have the BCM…
My question is will I have to find a wire harness to support the power setup or does my Camaro have it in place by default?
Thanks

No takers???
 

Ok, so let me throw this out there...

What if I decided to leave the current BCM in the car and built a wire harness that merely controlled windows and door locks?

Is it possible? I mean the wiring Dia looks pretty simple, but I am by far no electrician...I just want to go with the best approach...

My requirements:

• abilty to unlock both doors from driver door
• ability to control both windows from drive door
• add passenger door controls for window and lock

That's really it, again...I have the power doors already, but I don't know if my Camaro has the harness installed being that it manual by defualt...

Thanks Guys for any advice you can lend...