93-02 V6 Tech V6 Camaro General Topics.

97 Camaro Rs 3.8l

Thread Tools
 
Search this Thread
 
  #1  
Old 02-08-2012, 12:53 PM
hawkins183's Avatar
Newbie
Thread Starter
Join Date: Feb 2012
Location: East Peoria,IL
Posts: 26
Default 97 Camaro Rs 3.8l

Hey guys just ave a few questions i hopeto get answers to i ave a 97 Camaro rs 3.8l i bought the car knocking for a goo price but i only have access to a 99 camaro 3.8l engine what ddo i need to change to perform this swap? anything would be helpfull
 
  #2  
Old 02-08-2012, 01:17 PM
MKCoconuts's Avatar
4th Gear Member
Join Date: Oct 2011
Location: PA
Posts: 2,553
Default

Everything should be the same. As far as I know nothing was changed with the engine between 97 and 99, so should be a direct bolt up.
 
  #3  
Old 02-08-2012, 01:43 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,386
Default

Upper intake manifold, Exhaust manifolds and EGR tube. Your going to want to reseal your lower intake. It is a common issue and its 20 minutes with the upper intake off. It is a huge pain to do it while it is in the car. Also replace the plastic elbow under the intake. I think if you buy an “intake gasket kit” it will give you everything.

The 97 stock exhaust manifolds are crap so if you can get the Y pipe to the 99 you may want to use the 99 manifold but I am not sure how that work with your O2 sensors. Some years have 4 sensors and some have only 3. If you have some spare cash it is a great time to install some headers. I did a 96 to 02 conversion a couple of years ago you can click on the link in my sig project 96.
 
  #4  
Old 02-08-2012, 09:50 PM
mrlazar75's Avatar
In the Staging Lanes
Join Date: Dec 2011
Posts: 45
Default

Originally Posted by Gorn
Upper intake manifold, Exhaust manifolds and EGR tube. Your going to want to reseal your lower intake. It is a common issue and its 20 minutes with the upper intake off. It is a huge pain to do it while it is in the car. Also replace the plastic elbow under the intake. I think if you buy an “intake gasket kit” it will give you everything.

The 97 stock exhaust manifolds are crap so if you can get the Y pipe to the 99 you may want to use the 99 manifold but I am not sure how that work with your O2 sensors. Some years have 4 sensors and some have only 3. If you have some spare cash it is a great time to install some headers. I did a 96 to 02 conversion a couple of years ago you can click on the link in my sig project 96.

i think its felpro, they make a lower intake manifold gasket kit called the problem eliminator.
 
  #5  
Old 02-09-2012, 12:09 AM
RFxCamaro's Avatar
3rd Gear Member
iTrader: (1)
Join Date: Jun 2008
Location: Sacramento
Posts: 1,096
Default

If you have the engine out I say you do everything you can while its out. I would spend the $150 on the headgasket and oil pan gasket. Also consider get a valve job while its out. The headset comes with most everything you need like intake, exhaust and valve stem seals. These cars are not fun to work on with the engine inside.
 
  #6  
Old 02-13-2012, 09:51 PM
hawkins183's Avatar
Newbie
Thread Starter
Join Date: Feb 2012
Location: East Peoria,IL
Posts: 26
Default

thanks guys all was helkpfull got it back in the only that was different was the upper intake and he y pipe from the 99 had a fourh o2 but was better builso i eliminated it a used the 99 y just got it done but now i have more problems im tryin to work ou
\
 
  #7  
Old 02-13-2012, 09:52 PM
hawkins183's Avatar
Newbie
Thread Starter
Join Date: Feb 2012
Location: East Peoria,IL
Posts: 26
Default

could use more help if you guys dont mind
 
  #8  
Old 02-13-2012, 10:01 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,386
Default

Could you atleast give us a clue on what the problems are?
 
  #9  
Old 02-13-2012, 10:02 PM
BasicConcepts's Avatar
Overdrive Member
Technical User
Join Date: Oct 2009
Location: Greenville, South Carolina
Posts: 4,597
Default

Originally Posted by hawkins183
Hey guys just ave a few questions i hopeto get answers to i ave a 97 Camaro rs 3.8l i bought the car knocking for a goo price but i only have access to a 99 camaro 3.8l engine what ddo i need to change to perform this swap? anything would be helpfull
have access as in you can buy one or you have one lying around???

i suggest you buy a newer 3800 seriesIII engine from a 04–08 pontiac grand prix 05–09 buick laCrosse or 06-08 buick lucerne there easy to find and pretty cheap (i can find them for 300-500 with 50k or less) its a stronger more powerful well built engine and all you have to do is swap over the accessories the exhaust and the intake
 
  #10  
Old 02-13-2012, 10:03 PM
hawkins183's Avatar
Newbie
Thread Starter
Join Date: Feb 2012
Location: East Peoria,IL
Posts: 26
Default

on first start upngine fired right up ran a few seconds and died did this four or five times went over the wiring and vacumm everything looked good then started it again no spark changed coil still nothing
 



All times are GMT -5. The time now is 12:51 PM.