93-02 V6 Tech V6 Camaro General Topics.

3.4 SFI V6 Specs 93-96 Camaro from GM DOCUMENTATION

Old Aug 22, 2006 | 05:30 PM
  #1  
94CamaroSFI's Avatar
Thread Starter
|
2nd Gear member
Joined: Aug 2006
Posts: 482
From:
Default 3.4 SFI V6 Specs 93-96 Camaro from GM DOCUMENTATION



93-96 V6 Camaro Spec Sheet
Driver And Passenger Air Bags (93 Camaro was Chevrolet's first car with Passenger Air Bags) Four Wheel ABS, PASS-Key II Anti Theft System. ScotchGard Fabric Protector on seats and Door panels,Composite Body Panels Dent resistant and rust proof to keep this vehicle looking showroom new for many years (body wise)


L32 3.4 Liter V6 (207 Cu Inch)

60 Degree front Longitudinal, OHV
Bore:92.029 mm
Stroke 84 mm
Cast Iron block
Firing order 1-2-3-4-5-6
L (Front to Back ) 2-4-6
R 1-3-5
Horsepower:160
200 ft/lbs of torque
Knock Sensor Located Right Side Center of Block
Compression Ratio 9.0:1
Fuel: 87 octane
Fuel Tank Capacity= 15.5 Gallons
Total Engine Mass : 452 Lbs (Auto) 492.8 Lbs (Manual)

Sequential Fuel Injection
Computer Controlled Air/Fuel Ratio
Electronic Pulse (injection)
Cast Iron Block (29 Lbs)
Aluminum Intake Manifolds
Normal Oil Pressure:50-65 psi

Transmissions

Manual (M49)

Gear Ratios:
1st 3.75
2nd 2.19
3rd 1.41
4th 1.00
5th 0.72
Reverse 3.53
Use DexronII lubricant (2.8 L capacity)

Automatic aka Hydra-Matic 4L60E

4 speed Auto w/ Overdrive(4th gear Overdrive, Lock Up Torque converter Clutch)

1st 3.06
2nd 1.63
3rd 1.0
4th 0.70
Reverse 2.29

MAXIMUM Upshift speed: 1st-2nd=37 mph, 2-3=70 mph, 3-4th= N/A Above 56% throttle, Will not Make WOT 3-4th

MAXIMUM Upshift Engine RPM: 5200

Axle Ratio (Both Manual and Auto) 3.23

No. of Teeth- Pinion= 13 Ring Gear=42


COOLING SYSTEM

Thermostat Opens Coolant at 195 degrees F.
Single Fan ECM Controlled, RPM at Idle 1800-2000
Fan Switch point = 226 degrees F

Exhaust System
2.5" Single Exhaust All Stainless Steel
Single Catalytic Converter located underneath passenger seat


EXTERIOR DIMENSIONS

(In inches)
WHEELBASE=101.1
LENGTH(overall)=193.2
WIDTH=74.1
HEIGHT= COUPE 51.3, CONVERTIBLE=52.0
FRONT BUMPER TO GROUND CLEARANCE=5.1"
REAR BUMPER TO GROUND CLEARANCE= 13.7"



FRONT SUSPENSION
Independent W/ Coil Springs,SLA (Short/Long Arm W/ Coil Over Shock, Gas Charged Shocks.

REAR SUSPENSION
Salisbury Axle W/ Torque Arm,Trailing Arm,Track Bar, Coil Springs


Wheels And Tires
P215/60R-16 (STANDARD ON SPORT COUPE)
P235/55R16(STANDARD ON Z28; OPTIONAL FOR SPORT COUPE)
Rim Size
Cast Aluminum
16x7.5
16x8 (OPTION FOR SC, Z28 rims)

STRUCTURE
Full Unitized Steel Construction. Cowl,Roof,Underbody,And Body Panels Welded To Form Body Shell. Doors,Roof,And Hatch Lid Double Panel Construction

Total Glass Exposed Surface: 4,846.745 square inches. Convertible= 3,039.895 Sq In.

Lo-Beam Type:H4351
High Beam Type:H4352


Peace, and Godspeed
Aaron
94CamaroSFI
 
Old Aug 22, 2006 | 11:15 PM
  #2  
JaySan's Avatar
2nd Gear member
Joined: Jun 2006
Posts: 375
From:
Default RE: 3.4 SFI V6 Specs 93-96 Camaro from GM DOCUMENTATION

Do u no the specs. for a 98+ camaro's?
 
Old Nov 8, 2010 | 10:31 PM
  #3  
QuadMan91's Avatar
Newbie
Joined: Nov 2010
Posts: 3
Default

How much horsepower ad torque does a stock 1994 3.4 SFI camaro get to the wheels?
 
Old Nov 8, 2010 | 10:45 PM
  #4  
BasicConcepts's Avatar
Overdrive Member
Joined: Oct 2009
Posts: 4,597
From: Greenville, South Carolina
Technical User
Default

a 94 now like 130 maybe age reduces HP
 
Old Nov 8, 2010 | 10:46 PM
  #5  
WIspartan1026's Avatar
May 2013 ROTM
Joined: May 2009
Posts: 1,671
From: Farmington Hills, MI
ROTM Winner's Club
Default

stock crank hp: 160

wheel ~140ish.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
santa6
93-02 General
1
Oct 22, 2014 10:20 AM
RaiderGT
93-02 General
2
Nov 6, 2012 06:16 PM
Calwooz
93-02 General
1
Mar 18, 2012 10:03 PM
Petepd
67-69 General
0
Jan 18, 2012 07:14 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:02 AM.