help, engine problems!

Thread Tools
 
Search this Thread
 
  #1  
Old 12-16-2011, 06:43 PM
nickb123's Avatar
1st Gear Member
Thread Starter
Join Date: Nov 2010
Location: woodbury, MN
Posts: 199
Unhappy help, engine problems!

A little bit of back round; its a 1998 3.8 with a 5 speed, it has about 44K on the engine and 127K on the body. I was driving home tonight and while i was accelerating the seemed like all the power was gone with a certain amount of throttle in any gear. It feels like the clutch was slipping bad. when its idling it smooth and everything but the exhaust is like pulsating, I can feel it when i put my hand in front of the exhaust and see it because it is cold out. The pulsating is random. what could be wrong with it? I wont drive it until its fixed so i dont make what ever it is worse.
fast responses will be greatly appreciated.
 
  #2  
Old 12-16-2011, 07:06 PM
Guitar's Avatar
2nd Gear member
Join Date: Apr 2011
Posts: 317
Default

Might not be getting enough fuel?
 
  #3  
Old 12-16-2011, 07:25 PM
craby's Avatar
April 2011 ROTM
ROTM Winner's Club
Join Date: Mar 2009
Location: Tokeland, Washington
Posts: 21,750
Default

check fuel pressure. could be a plugged catalytic converter. are you getting a ses light? scan for codes and see what comes up.
 
  #4  
Old 12-16-2011, 07:34 PM
nickb123's Avatar
1st Gear Member
Thread Starter
Join Date: Nov 2010
Location: woodbury, MN
Posts: 199
Default

The ses light has been on for a long time because of the code for catalytic converter below efficiently. The problem happened pretty much instantly. I will try to get to auto zone this weekend to scan it. but in the mean time any more probable causes?
 
  #5  
Old 12-16-2011, 07:58 PM
JGuy07's Avatar
2nd Gear member
Join Date: Sep 2011
Location: Lebanon, Indiana
Posts: 483
Default

Well as to what craby said, the cat could be your problem then...
 
  #6  
Old 12-16-2011, 08:14 PM
nickb123's Avatar
1st Gear Member
Thread Starter
Join Date: Nov 2010
Location: woodbury, MN
Posts: 199
Default

Replacing that has been on my to do list for a while anyways. Is this a good cat to buy? and would I expect any more power and mpg from it? Magnaflow/Catalytic Converter (99306HM) | 1998 Chevrolet Camaro 6 Cylinders K 3.8L SFI OHV | AutoZone.com it is universal so i would have a exhaust shop weld it in.
 
  #7  
Old 12-17-2011, 01:52 AM
craby's Avatar
April 2011 ROTM
ROTM Winner's Club
Join Date: Mar 2009
Location: Tokeland, Washington
Posts: 21,750
Default

if you have a plugged cat then you will see increased performance and mpg after the install. if its not plugged then the biggest difference you will have is sound. it would be a good idea to check the spark plugs and 02 sensors for fouling (all black) they can get fouled because of the poor exhaust flow
 

Last edited by craby; 12-17-2011 at 01:54 AM.
  #8  
Old 12-18-2011, 09:08 AM
nickb123's Avatar
1st Gear Member
Thread Starter
Join Date: Nov 2010
Location: woodbury, MN
Posts: 199
Default

I scanned it and the only code i got was p0420: cat below threshold.
 
  #9  
Old 12-18-2011, 02:51 PM
JGuy07's Avatar
2nd Gear member
Join Date: Sep 2011
Location: Lebanon, Indiana
Posts: 483
Default

Does MN have emissions? If not, just gut the cat and put it back on. Or you just have to replace.
 
  #10  
Old 12-18-2011, 04:58 PM
nickb123's Avatar
1st Gear Member
Thread Starter
Join Date: Nov 2010
Location: woodbury, MN
Posts: 199
Default

no emissions here. i want to replace it because members here said no cat makes the exhaust sound really raspy. But the more i think about it the less likely it seem it would be a cat. It just doesnt make sense. Its all most like its not buring enough fuel or something. im going to bring it to a tomorrow to see if they can figure anything out. if anyone else has any other ideas that would be great.
 


Quick Reply: help, engine problems!



All times are GMT -5. The time now is 11:19 PM.