front turn signal light

Old Jun 24, 2008 | 09:16 PM
  #1  
Andrew*B's Avatar
Thread Starter
|
Newbie
Joined: Oct 2007
Posts: 10
Default front turn signal light

I have a '95 and my front left turnsignal light went out and could not figure out how to get to it.
any help would be great.

Thanks

 
Old Jun 24, 2008 | 10:10 PM
  #2  
1995CamaroZ28's Avatar
In the Staging Lanes
Joined: Mar 2008
Posts: 41
From:
Default RE: front turn signal light

I had the same problem. I think i changed it from the bottom there is a panel. Just remove the screw to gain acess.
 
Old Jun 24, 2008 | 11:20 PM
  #3  
xXOfNiRXx's Avatar
Newbie
Joined: Jun 2008
Posts: 27
Default RE: front turn signal light

Lift the car and you'll see a few 10mm or 12mm nuts that unscrew; after removing those you'll be able to remove the panels that protect the underbody/ front headlight area.
 
Old Jun 25, 2008 | 01:03 AM
  #4  
MusicMan's Avatar
The Jazz Man
Joined: Mar 2008
Posts: 2,237
From: St. Helens, Oregon
ROTM Winner's Club
Default RE: front turn signal light

And wear safety glasses, there's a lot of graval/dust/dirt that is hiding up there, took forever to get the stuff out of my eyes.
 
Old Jun 25, 2008 | 12:50 PM
  #5  
TotalChaos's Avatar
In the Staging Lanes
Joined: Aug 2006
Posts: 61
From:
Default RE: front turn signal light

HAHA i'm am so sorry you have to do that. I've done it before and it sucks having to do it. Also try changing the bulbs in your fog lights sometime. Just pray that you don't have screws holding it in....that's all i got to say.
 
Old Jun 25, 2008 | 02:57 PM
  #6  
95slvrZ28's Avatar
Overdrive Member
Joined: Aug 2006
Posts: 4,496
From: Boulder, CO
Default RE: front turn signal light

You have to take off the front air dam and then you can remove the splash panels that cover the front accessories. It can be done without jacking up the car, but it's a tight squeeze.

Musicman, good call on the safety glasses, I made the mistake of not wearing any when I changed mine...that was interesting to say the least...[&o]
 
Old Jun 25, 2008 | 07:25 PM
  #7  
MusicMan's Avatar
The Jazz Man
Joined: Mar 2008
Posts: 2,237
From: St. Helens, Oregon
ROTM Winner's Club
Default RE: front turn signal light

Oh, and I swapped out my corners without lifting the car, it can be done with it on the ground, but ramps are a good thought too. I think the bulb can be changed from the top, I can reach down there.
 
Old Jun 26, 2008 | 01:53 AM
  #8  
95slvrZ28's Avatar
Overdrive Member
Joined: Aug 2006
Posts: 4,496
From: Boulder, CO
Default RE: front turn signal light

The bulb cannot be changed from the top, trust me, I tried. [>:]
 
Old Jun 26, 2008 | 01:55 AM
  #9  
BeraniHull's Avatar
1st Gear Member
Joined: Apr 2008
Posts: 253
From:
Default RE: front turn signal light

Would this be any different for a 98 Camaro?
 
Old Jun 26, 2008 | 01:59 AM
  #10  
MusicMan's Avatar
The Jazz Man
Joined: Mar 2008
Posts: 2,237
From: St. Helens, Oregon
ROTM Winner's Club
Default RE: front turn signal light

Hmm, I think it can be done, I can the socket from up top. But I have long arms, maybe that's why, I dunno. It's not too much work to do it from the bottom, especially if you have an air ratchet like me.
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:21 PM.