exhaust manifold gaskets

Old Aug 14, 2015 | 05:44 PM
  #21  
warmeck's Avatar
Thread Starter
|
2nd Gear member
Joined: May 2014
Posts: 347
Default

goddamn this fbody!!! so i replaced the spark plugs today which was a PITA!!! now its smoking again on the passenger side near the manifold? replaced valve cover gaskets so i know its not that. i know its not the intake gasket because its dry in the back where the intake gasket rtv should be. any other ideas? maybe old oil?
 
Old Aug 14, 2015 | 10:35 PM
  #22  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

is it leaving a consistant oil patch under the car? if the oil got soaked into the exhaust manifold it can take a bit to burn off. few minutes
 
Old Aug 15, 2015 | 07:28 AM
  #23  
warmeck's Avatar
Thread Starter
|
2nd Gear member
Joined: May 2014
Posts: 347
Default

Originally Posted by craby
is it leaving a consistant oil patch under the car? if the oil got soaked into the exhaust manifold it can take a bit to burn off. few minutes
as far as i can tell yes it is. well ill let it run again later today for 15minutes and see if it burns off.
 
Old Aug 15, 2015 | 07:53 AM
  #24  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

if its leaving a consistant patch of oil then it sounds like its still leaking somewhere.
 
Old Aug 15, 2015 | 02:18 PM
  #25  
warmeck's Avatar
Thread Starter
|
2nd Gear member
Joined: May 2014
Posts: 347
Default

Originally Posted by craby
if its leaving a consistant patch of oil then it sounds like its still leaking somewhere.

yeah i think so too i cant find this damn leak though.
 
Old Aug 15, 2015 | 03:24 PM
  #26  
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
iTrader: (1)
Joined: Nov 2007
Posts: 10,560
From: Eastern PA,
ROTM Winner's Club
Default

Handy to have

USB Video Inspection 6 LED Borescope Endoscope 7mm Waterproof Camera Snake Scope | eBay

Actual picture of the valve cover edge on a Lt1, kind of tuff to not see an oil leak.
Name:  valvecover.jpg
Views: 67
Size:  18.2 KB
 
Old Aug 15, 2015 | 07:56 PM
  #27  
warmeck's Avatar
Thread Starter
|
2nd Gear member
Joined: May 2014
Posts: 347
Default

Originally Posted by Gorn
Handy to have

USB Video Inspection 6 LED Borescope Endoscope 7mm Waterproof Camera Snake Scope | eBay

Actual picture of the valve cover edge on a Lt1, kind of tuff to not see an oil leak.
definately will pick one up... so i was driving around today and my shifter is shaking like crazy and the car is shaking a little bit at highways speeds? i hope its not my clutch
 
Old Aug 16, 2015 | 08:36 AM
  #28  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,016
From: Tokeland, Washington
ROTM Winner's Club
Default

did you do the plugs one at a time, maybe recheck all your plug wires and make sure there in the right place. easy to get crossed and with some its not so easy to tell.
 
Old Aug 16, 2015 | 03:56 PM
  #29  
warmeck's Avatar
Thread Starter
|
2nd Gear member
Joined: May 2014
Posts: 347
Default

Originally Posted by craby
did you do the plugs one at a time, maybe recheck all your plug wires and make sure there in the right place. easy to get crossed and with some its not so easy to tell.
i did the plugs 1 at a time but i will check again.
 
Old Aug 19, 2015 | 03:27 PM
  #30  
warmeck's Avatar
Thread Starter
|
2nd Gear member
Joined: May 2014
Posts: 347
Default

well i checked the plugs and they seem to be in the right place, i am going to take all the spark plugs out and re-gap them. they were pre gapped at 050
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:04 AM.