one on each side of the block, one half bolts to the block and one half bolts to the k member frame. they are held together with a long bolt that goes threw. look below the driver side spark plugs, below number 3 plug you will see the mount. theres another on the other side below/behind the power steering/ac pumps

 

got the mounts out and got the headers in.. now only problem is finding header bolts and trying to put everything back together. (any trick to getting the motor mounts back in? should i let the motor hang or jack it up and try to find the right spot? been having trouble with it.)

 

got the engine mounts back in and put in the passenger side spark plugs and wires. now im waiting on $$ for header bolts should be able to get them by tomorrow.

 

good deal. wasnt so bad eh, lol.

 

not at all lol i am going to get some pictures up i feel like ive been talking you to death without some detailed pictures haha. i am going right now to pepboys to pickup header bolts then ill see how far i get with putting everything back on.

 

my header bolts are not going in at all... i thought these bolts were 3/8th for headers. i went to pepboys and bought there 3/8 kit but i am having trouble getting them to thread. they might be stripped or either i need to use a stud header bolt?

 

they arrr 3/8-16 move headers outa the way and try getting them in. holes in headers may be a bit off.

 

3/8-16 x by what? these are the ones i got from pepboys http://www.pepboys.com/product/details/9965931/00238

 

mine are 1 inch.

 

yeah so i took off the headers and the bolts threaded on there perfectly so i am going to have to line up the gasket perfectly and then place the header on there to ensure that i have it lined up right. is there a front and back side to the header gaskets? i see one that is flat and the other is raised?