intake manifold or cam?
#5
RE: intake manifold or cam?
A cam and intake are not going to hurt you. Just have to be sure to get an intake for EGR. But to do a cam you are going to have to pull the intake anyway. If you were to go witha cam might as well do both at once.
#9
RE: intake manifold or cam?
so ive decided to do the intake manifold. right now im leaning towards the edelbrock performer from summit. now my question. does anybody have any expirience with this manifold? good? bad? and will i need an adapter for the stock carb to fit?
87 camaro z28 carb'd 305
any answers would be much apprieciated
thank you
joe
87 camaro z28 carb'd 305
any answers would be much apprieciated
thank you
joe
#10
RE: intake manifold or cam?
I had that one on my 84.
No adapter. You can see by the pic it is open for the larger secondaries on the Q-jet.
It will raise the hight of your carb and air cleaner I think 1/4". My hood still closed with the stock air cleaner but you could see where it slightly rubbed on the hood insullation.
And if you are using the stock air cleaner there is a ring in it around the opening for the carb. When the lid is bolted on it closes up cutting off air. Three spot welds to grind and that ring pops out. A cheap and FREE mod.
No adapter. You can see by the pic it is open for the larger secondaries on the Q-jet.
It will raise the hight of your carb and air cleaner I think 1/4". My hood still closed with the stock air cleaner but you could see where it slightly rubbed on the hood insullation.
And if you are using the stock air cleaner there is a ring in it around the opening for the carb. When the lid is bolted on it closes up cutting off air. Three spot welds to grind and that ring pops out. A cheap and FREE mod.