Help Trunk locked

Thread Tools
 
Search this Thread
 
  #1  
Old 08-21-2008, 02:40 AM
jim89's Avatar
Newbie
Thread Starter
Join Date: Aug 2008
Posts: 2
Default Help Trunk locked

Hey guys im new to this forum and i need alittle help. well i was cleaning my trunk one day and i think i left my door key on the lip of my trunk and shut it. well now i can't open it to see if my key is there do you have any advice on how to open a trunk with no key?. i have access to the inside but not the trunk please help thanks in advance.
 
  #2  
Old 08-21-2008, 08:53 AM
350rs's Avatar
March 2008 ROTM
Join Date: Apr 2006
Location: St. Louis, Missouri
Posts: 2,437
Default RE: Help Trunk locked

a medium sized hammer contacting that glass at a high rate of speed aughta do the trick!

but in all seriousness. is it a electric pull down type or the manual? i assume its the manual tupe. in which case you might have to call a locksmith OR risk damaging something
 
  #3  
Old 08-21-2008, 09:07 AM
jim89's Avatar
Newbie
Thread Starter
Join Date: Aug 2008
Posts: 2
Default RE: Help Trunk locked

I know i thought of that but it is an electronic pulldown. is there a way that i can put power to the lock somehow and open it or take off the plastic around it and hit a lever there has to be a way instead of anger management.
 
  #4  
Old 08-21-2008, 09:15 AM
84chevyz28's Avatar
Newbie
Join Date: Aug 2008
Posts: 3
Default RE: Help Trunk locked

go lean over the back seat and use a flat blade screw driver in the tumbler hole in the mecanism you can open it that way i did that on a 91 i had with no key
 
  #5  
Old 08-21-2008, 10:13 AM
MadMikeZ28's Avatar
Overdrive Member
Join Date: Jul 2006
Location:
Posts: 4,248
Default RE: Help Trunk locked

Leaning over the seat with a screwdriver works if there is no plastic panel. But if you think you left your key in there why can you fold the rear seat down and crawl in?
 
  #6  
Old 08-21-2008, 10:55 AM
black89rs's Avatar
1st Gear Member
Join Date: Jul 2007
Location:
Posts: 146
Default RE: Help Trunk locked

hey mike he said he left it on the lip
 
  #7  
Old 08-21-2008, 11:24 AM
350rs's Avatar
March 2008 ROTM
Join Date: Apr 2006
Location: St. Louis, Missouri
Posts: 2,437
Default RE: Help Trunk locked

i still like my hammer idea.. lol. thats A LOT more fun than anything else listed so far. but its probably the messyest AND most expensive alternative..
 
  #8  
Old 08-21-2008, 01:25 PM
MadMikeZ28's Avatar
Overdrive Member
Join Date: Jul 2006
Location:
Posts: 4,248
Default RE: Help Trunk locked

ORIGINAL: black89rs

hey mike he said he left it on the lip
OOPS, My bad. By the time I finished reading I thought I had seen lid.
Then if a key is sitting on the lip that is easy. If its on the edge of the plastis inside then he should still be able to climb in the back and fish with a screw driver or something flat. If its on the metal outside the rubber seal then he should be able to see it on the sides or if its above the tail lights fish it out from there with a bent coat hanger or flush with water.

Oh and 350RS. You are starting to sound like ScottD!
 
  #9  
Old 08-21-2008, 02:00 PM
350rs's Avatar
March 2008 ROTM
Join Date: Apr 2006
Location: St. Louis, Missouri
Posts: 2,437
Default RE: Help Trunk locked

HAHA!! NEVER!!
 
  #10  
Old 08-21-2008, 02:11 PM
MadMikeZ28's Avatar
Overdrive Member
Join Date: Jul 2006
Location:
Posts: 4,248
Default RE: Help Trunk locked

Ya know after seeing the recent pic ScottD posted doing the burnout I undestand why the hammer is his favorite tool, The harley tool!
 


Quick Reply: Help Trunk locked



All times are GMT -5. The time now is 05:57 PM.