ATTN!!!!! 350RS PLEASE READ
#11
RE: ATTN!!!!! 350RS PLEASE READ
you guys would be suprised to see how many things can be done to a small block, i was talking about boring out my block bigger and he gave me the different bore sizes and what it would account for, i didn't even know it was possible to make a small block into a 396, but thats just not really on my budget right now.
#12
RE: ATTN!!!!! 350RS PLEASE READ
ORIGINAL: Dougs1990rs
go to www.strokerkits.com/sbc_forged.htm . it has a 3.875 stroke with a 6in rod and only needs to be bored 30 over. sell's for $1380 on this website. kit # 1-40900-1. hope this was some help for you.
go to www.strokerkits.com/sbc_forged.htm . it has a 3.875 stroke with a 6in rod and only needs to be bored 30 over. sell's for $1380 on this website. kit # 1-40900-1. hope this was some help for you.
#13
RE: ATTN!!!!! 350RS PLEASE READ
ORIGINAL: MadMikeZ28
Thats right with stoke. With that stroke you can get 420 our of a 400 SB. But by just using stock production parts your not going to be able to bore out a 350 for it. I don't give a **** what some dumb *** machinist says. You want to learn the truth on small blocks pick up one of John Lingenfelter's books.
ORIGINAL: Dougs1990rs
go to www.strokerkits.com/sbc_forged.htm . it has a 3.875 stroke with a 6in rod and only needs to be bored 30 over. sell's for $1380 on this website. kit # 1-40900-1. hope this was some help for you.
go to www.strokerkits.com/sbc_forged.htm . it has a 3.875 stroke with a 6in rod and only needs to be bored 30 over. sell's for $1380 on this website. kit # 1-40900-1. hope this was some help for you.
#14
RE: ATTN!!!!! 350RS PLEASE READ
hold on, wait a second, i don't remember saying anything about using stock parts for it, its an obvious fact that your going to have to change all of the internals in order to accomodate that, if i did say something like that i one of the last posts, i apoligize for giving wrong facts.
#15
RE: ATTN!!!!! 350RS PLEASE READ
Motorcity Madhouse! Motorcity Madhouse! with fuel prices going back up! my little 305 tbi gets me in enough trouble, especially being a daily driver, but i loved the post just the same. MadMike and 350 rs how are you guys doing, have been out of town working and missed seeing your colorful comments, take care ttyl.
#16
RE: ATTN!!!!! 350RS PLEASE READ
ORIGINAL: camaro maniac
About that forum that you posted asking if it was possible to make a 350 to a 396, i have good news for you, not many people know, but i was talking to a machinest in my local areaand he said that it is possible to bore it out to a 396 with the cylinder walls being of the same diameter but it obviously won't be a big block like every other 396 out there, i had plans on doing that to my small block was it was justa little bit more than i could afford at the time, but i was told that it is deffinetly possible.
About that forum that you posted asking if it was possible to make a 350 to a 396, i have good news for you, not many people know, but i was talking to a machinest in my local areaand he said that it is possible to bore it out to a 396 with the cylinder walls being of the same diameter but it obviously won't be a big block like every other 396 out there, i had plans on doing that to my small block was it was justa little bit more than i could afford at the time, but i was told that it is deffinetly possible.
Also when you go with a longer stroke from an aftermarket crank you have a chance of running into clearance issues and need to clearance the block and posibly the pan.
Dihighway
I personaly have not been picking on ScottD for a while. I can't speak for 350rs though. He may have been still digging in on him.
#17
RE: ATTN!!!!! 350RS PLEASE READ
oh, im diggen, and ive gotten under his skin, cant take a joke i suppose. i dont know. lol. Never ment to **** the guy off, but, well... seems like i have managed to.
#18
RE: ATTN!!!!! 350RS PLEASE READ
350rs, i hope i was help with you figuring things out the right way of boring a small block to a 396, now that i know all of the parts that i'll need, and where i can get them i might do that, keep me posted on the progress and let me know how it goes for you.
#19
RE: ATTN!!!!! 350RS PLEASE READ
Oh im laughing bigtime! well boys in keeping score i think 350rs pulled alittle ahead of you Mike? probably should lay off the nitrous 350rs! unless you have a dentist appt: lol., MadMike i have no doubts you will be crowned king! jabba de slamma of threads, especially with fall approaching, should be some new members with the beaches closed to truly distance the gap from 350rs, LMAO. Well i'm off to wrench on the maro been neglecting her being out of town and all. Remember fellow members if you cant be good to yourself! then be GREAT to your car! have a great day.
#20
RE: ATTN!!!!! 350RS PLEASE READ
camaro, i would still like a 396. ill talk to a few shops around here to see if they have any thoughts about it. Ill prolly just have to go with a 383 or something.
Mike, not sayin your dumb here, i am the student after all. But i do have a question for you. Why cant you make a 396 SB without siameseing the cylinders when you can get a 400 sb?
and last but not least, highway. i never intended on making the guy mad at me. I thought he was just takin the jokes in stride. CLEARLY he wasnt. oh well, i havent lost any sleep over it.
Mike, not sayin your dumb here, i am the student after all. But i do have a question for you. Why cant you make a 396 SB without siameseing the cylinders when you can get a 400 sb?
and last but not least, highway. i never intended on making the guy mad at me. I thought he was just takin the jokes in stride. CLEARLY he wasnt. oh well, i havent lost any sleep over it.