Finding out what year parts fit which other years.

Old Nov 21, 2012 | 09:29 PM
  #1  
reidski182's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Sep 2012
Posts: 41
Default Finding out what year parts fit which other years.

Hello again.

I've been searching craigslist for parts, and found some great deals! Obviously not many '75 parts, though. Not too popular. Rather than asking specifically about my situation, I would like to know how you guys would go about finding out which parts from one year would fit into another year. Hopefully I can take it from there. I know there's a couple obvious changes like grilles, tail lights, and head lights, but do things like doors change by year?

Thanks
 
Old Nov 22, 2012 | 02:27 AM
  #2  
77nomad's Avatar
Overdrive Member
Joined: Nov 2009
Posts: 4,848
From: off the grid
Default

Yea there are 70-7-73or4 doors. The differance is the inside handle. which as long as you get the matching doorpanel, your good. The dashes changed in 79. So two options there. The control arm bushings changed around then too, as well as the inner wheel bearing. I may be wrong on the control arm bushing though. I want to say it was an early car thing. Then the interiors changed too. The consoles go from 70-73 74-80, and 81 was its own thing. The map pocket in the front got ditched to hide the computer.
 
Old Nov 22, 2012 | 01:13 PM
  #3  
reidski182's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Sep 2012
Posts: 41
Default

Sweet. Cause I found a bunch of '79 parts (center console, quarter panels, doors, and side mirrors) for only $150. Lookin' good so far. Thank you 77nomad.
 
Old Nov 22, 2012 | 08:59 PM
  #4  
exlimey's Avatar
1st Gear Member
Joined: Sep 2011
Posts: 173
From: Elk Rapids, Michigan
Default

fenders are the same 70-77 then changed in 78. The dash bezel looks the same from 70-78 but the wiper switch and the way it mounts changed on 73-78.
 
Old Nov 22, 2012 | 10:49 PM
  #5  
77nomad's Avatar
Overdrive Member
Joined: Nov 2009
Posts: 4,848
From: off the grid
Default

The quarter wont work either. Most of it can be used for a patch though. The area around the tail lights is off. The cut out for the light specifically. I didn't meantion that because you meationed the rear in yor post. The floors are different from 75 up and the trunk is different after 77ish?
 
Old Dec 29, 2012 | 10:25 PM
  #6  
reidski182's Avatar
Thread Starter
|
In the Staging Lanes
Joined: Sep 2012
Posts: 41
Default

Thread revival time!

I appreciate the help with this, however, my question was more about how I could learn all of the changes myself. Is it just head knowledge, or is there somewhere I can look to? I don't want to bother the Camaro forums everytime I see something that looks like a good deal.
 
Old Dec 30, 2012 | 09:09 AM
  #7  
exlimey's Avatar
1st Gear Member
Joined: Sep 2011
Posts: 173
From: Elk Rapids, Michigan
Default

Bother away. It's been too quiet here. I'd say its mostly head knowlage.
 
Old Dec 30, 2012 | 09:31 AM
  #8  
Camaro 69's Avatar
Senior Moderator
January 2010 ROTM Winner
Joined: Oct 2007
Posts: 18,306
From: The 'Burbs of Chicago
Default

One very simple way is to go to one of the Camaro resto supply sites: NPD, Classic Industries, rickscamaros, etc.
If the part you're looking for is available in the aftermarket, they will show the year fitment range.
 
Old Dec 30, 2012 | 10:06 AM
  #9  
77nomad's Avatar
Overdrive Member
Joined: Nov 2009
Posts: 4,848
From: off the grid
Default

Do like I did. Tear your car apart five or six times. Then a stack of catalogs next to the throne to study. There will be an exam later. Followed by a Theseus statement on GM's astro ventilation system.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EightySixCamaro
82-92 General
5
Jul 1, 2011 08:13 PM
jrm84berlinetta
82-92 General
4
Jun 4, 2010 08:29 PM
02renegade
70-81 General
2
May 4, 2006 10:02 PM
YFM3501999
82-92 General
9
Jan 16, 2006 05:25 PM
bad2801
70-81 General
5
Nov 17, 2005 12:43 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:06 PM.