67 Updating
#1
67 Updating
Hey everyone....Hoping I could get some information.
We are looking at doing some badly needed work on our '67 Camaro. (The #'s do not match so we are pretty open to anything)
Here is a picture....and some specs as it sits now
Specs:
427
2 Speed Automatic Transmission
Non-Powered Drums all the way around
Non-Powered Steering
No Suspension work
No Frame reinforcement
So basically....It has a Big *** engine and nothing else has been done to it.
We have done nothing to it for over 15 years and it is just sitting and would like to update it.
This is what we would like to do.....(ANY AND ALL SUGGESTIONS WOULD BE APPRECIATED)
Update Suspension - all the way around
install a Turbo 400 Transmission
Wheels and Tires Updated
Disc Brakes......(Front or All the way around)
Power Steering
Aluminum Rad....Electric Fan
Paint, detailing etc.....(Mechanical Stuff first)
What kind of budget are we looking at and when would we hit the point of being better off to just send it somewhere?
Thanks in advance
We are looking at doing some badly needed work on our '67 Camaro. (The #'s do not match so we are pretty open to anything)
Here is a picture....and some specs as it sits now
Specs:
427
2 Speed Automatic Transmission
Non-Powered Drums all the way around
Non-Powered Steering
No Suspension work
No Frame reinforcement
So basically....It has a Big *** engine and nothing else has been done to it.
We have done nothing to it for over 15 years and it is just sitting and would like to update it.
This is what we would like to do.....(ANY AND ALL SUGGESTIONS WOULD BE APPRECIATED)
Update Suspension - all the way around
install a Turbo 400 Transmission
Wheels and Tires Updated
Disc Brakes......(Front or All the way around)
Power Steering
Aluminum Rad....Electric Fan
Paint, detailing etc.....(Mechanical Stuff first)
What kind of budget are we looking at and when would we hit the point of being better off to just send it somewhere?
Thanks in advance
#3
RE: 67 Updating
i'm in the process of installing front disc brakes on my 67, SSBC brake package dual piston , got it from Jeg's and all new ball joints and tie rods and bushings , i'm thinking i should have went with some tubelar control arms but oh well i'll change them if i don't like this setup that i'm doing , live and learn i guess
[IMG]local://upfiles/6679/3731BC9EA045482C8F2714809ED499A5.jpg[/IMG]
[IMG]local://upfiles/6679/3731BC9EA045482C8F2714809ED499A5.jpg[/IMG]
#6
Thread
Thread Starter
Forum
Replies
Last Post
bearfrods
Audio/Visual Electronics
4
03-01-2012 02:29 AM
mike83camaroBA
93-02 General
2
12-19-2005 11:21 AM