LT1/LT4 Tech 1993-1997

cruise inop, vacuum plugs

Old Sep 27, 2010 | 12:47 PM
  #1  
Raingler's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2009
Posts: 177
From: Colomaro USA
Default cruise inop, vacuum plugs

This is I think the last thing that doesn't work on this 175k mile old SS. I find three places that are definitely not correct. Any help on what should be like is appreciated!

Note first pic has a bolt at a T junction, second had a bolt that just fell out as I moved it. Thirde pic on pass side has an empty place that looks like a hose should be there but do not see a hose. Also note the blue connecters installed back there. Thanks!
 
Attached Thumbnails cruise inop, vacuum plugs-img_0081.jpg   cruise inop, vacuum plugs-img_0082.jpg   cruise inop, vacuum plugs-img_0083.jpg  
Old Sep 27, 2010 | 11:58 PM
  #2  
Raingler's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2009
Posts: 177
From: Colomaro USA
Default

I'm thinking all the T taps are something that someone added for unknown reasons. The hose between the two T's is smaller in diameter etc. Underneath things I find another place that looks like a vacuum hose should be there and is not as well as a loosened bolt down here so somebody has tinkered with it. Lowered the panel to get to the cruise box and seems undisturbed. Is there supposed to be a vacuum canister somewhere that maybe has been removed? I need to find a vacuum diagram and go get some supplies I'm thinking to clean things up.
Trying to get these details done before wife gets back from Kuwait next week, long overdue drive in the mountains would be awesome before snows start up here. Thanks all

EDIT, Found shbox's site. That will keep me busy for awhile!
 
Attached Thumbnails cruise inop, vacuum plugs-img_0084.jpg   cruise inop, vacuum plugs-img_0085.jpg  

Last edited by Raingler; Sep 28, 2010 at 12:51 AM.
Old Sep 28, 2010 | 02:33 AM
  #3  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,022
From: Tokeland, Washington
ROTM Winner's Club
Default

pick up a factory sevice/shop manual for your yr, best investment youll make. heres a good deal on the set, 96 is a two book set.
http://cgi.ebay.com/ebaymotors/ws/eB...d=110581228215
 
Old Sep 28, 2010 | 06:35 AM
  #4  
torque_is_good's Avatar
4th Gear Member
Joined: Nov 2008
Posts: 2,614
From: under the hood
Default

Originally Posted by craby
pick up a factory sevice/shop manual for your yr, best investment youll make. heres a good deal on the set, 96 is a two book set.
http://cgi.ebay.com/ebaymotors/ws/eB...d=110581228215
best darn advice you can give. Good shop manuals are worth their weight in gold.
 
Old Sep 28, 2010 | 10:33 AM
  #5  
Raingler's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2009
Posts: 177
From: Colomaro USA
Default

Word for sure. I just ran and got a Haynes this AM. The GM manual sounds key on this car since I'm more after a mostly stock driver at this time. It sure beats paying someone else to do it too.
 
Old Sep 29, 2010 | 12:35 AM
  #6  
Raingler's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2009
Posts: 177
From: Colomaro USA
Default

Grabbed onto that Ebay set there, thanks! I spent a awhile tinkering, checking for things unplugged, corroded etc up under the front end I'm gonna guess right now the cruise module is just dead or the column switch is bad. no fuses out, wiring all good, just does nothing at all when you try to set it. No lite on, nothing...
Good score was I found two Snap-On sockets in that pocket I had been missing for awhile.
 

Last edited by Raingler; Sep 29, 2010 at 12:37 AM.
Old Sep 29, 2010 | 12:44 AM
  #7  
craby's Avatar
April 2011 ROTM
Joined: Mar 2009
Posts: 22,022
From: Tokeland, Washington
ROTM Winner's Club
Default

yah thats the cheapest ive seen for a two book set. i dont have anything on the 96 wiring so im not much help there. the throttle system you have is way different than mine.
 
Old Sep 30, 2010 | 03:56 PM
  #8  
Raingler's Avatar
Thread Starter
|
1st Gear Member
Joined: Sep 2009
Posts: 177
From: Colomaro USA
Default

Got it! White switch at top of clutch pedal had adjusted itself back enough that the clutch wasn't pushing the switch in enough so the car thought the clutch was being pushed in; canceling cruise from working. Hope this helps someone else.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hoursetraitor
LT1/LT4 Tech
5
Apr 25, 2011 10:14 PM
1999chevy
93-02 V6 Tech
9
Jun 21, 2009 12:23 AM
Skippysnax
LT1/LT4 Tech
15
Feb 16, 2009 11:48 AM
camaro girl
93-02 V6 Tech
9
Dec 9, 2008 06:47 PM
mikes77camaro
70-81 General
19
Oct 22, 2008 10:02 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:49 AM.