AFR heads...
#1
AFR heads...
okay so i was just looking through the thousands of recipts that the previous owner who sold me my car collected... and i found a Air Flow Research Heads CNC ported - sticker in the mess. wow. is there any way to tell if these were actually installed in the car? also, can you guys give me any info on these things?
#4
If you have AFR heads, you would see a Big AFR logo stamped into the front of them.
http://www.airflowresearch.com/store...?cPath=1_2_115
http://www.airflowresearch.com/store...?cPath=1_2_115
#5
yup...AFR is a good brand for heads...but most people would never need an aftermarket head as the stock heads can be ported enough to meet most people's goals. now if we're talking a big cube stroker motor, then by all means the porting an aftermarket head is the way to go.
if i were you and i found that i did have AFR heads on my car...i'd find out as much as i could about exactly what they are and then i'd pull them and sell them and put stock ones back on. then you have some money to mess around with
if i were you and i found that i did have AFR heads on my car...i'd find out as much as i could about exactly what they are and then i'd pull them and sell them and put stock ones back on. then you have some money to mess around with
#6
ok its hrd to see the front of the heads. i tried to take good pictures, but idk where to look. im new to this camaro thing. i noticed in the first picture, in the middle of the pic, that it says "W2" in the on the right side of the motor (from the front). anything?