Turbo 95 3.8 Camaro
#3
RE: Turbo 95 3.8 Camaro
My Camaro is an automatic, would that matter in this installation? And is there anyone I could trust to install this kit, and then tell me how to run the kit and keep it clean? The engine size is the 3.8. This is a first car for me (Im 15 liscense at 16) so i just wanted to see.
Thanks for The Reply 02StangGT
Anymore help would be greatly appreciated!
And please no, stereotypical comments such as "Kids and cars these days",or "Come back when your older!"
Thanks
Thanks for The Reply 02StangGT
Anymore help would be greatly appreciated!
And please no, stereotypical comments such as "Kids and cars these days",or "Come back when your older!"
Thanks
#4
RE: Turbo 95 3.8 Camaro
http://www.3800pro.com/forum/turbos/...aro-3-8-a.html
http://www.3800pro.com/forum/
I would go here.
http://www.3800pro.com/forum/
I would go here.
#6
RE: Turbo 95 3.8 Camaro
http://www.ststurbo.com/universal_system_ this is the website for the turbo. If this wont work will I just have to get a new exhaust system, headers, cams, etc.? If this is the case could you guys help me
Thanks
Thanks
#7
RE: Turbo 95 3.8 Camaro
yes by the fact that it is a universal turbo i can be installed on your car however... its gonna take quite a bit of custom fab to get it there...your gonna have to have a custom intake made for it. as well as all custom piping for the blow off valve. all not cheap stuff.... and your only gonna be able to run about 7 psi on the stock block. which given is 100 horse power but. youve probly spent 5 grand at this point you have a turbo car with exaught system that cant support it. and a drive train thats sending all your power to one wheel. consintrate on the supporting mods first....full bolt ons....drivetrain improvments... once all thats done... if you wanna do turbo go for it. just know its gonna be alot of custrom work on your or sombody else part. and if its sombody else it aint gonna be cheap