Please Help 3.1 V6- V8 Swap?

Old Jan 10, 2008 | 11:15 AM
  #1  
94CamaroSFI's Avatar
Thread Starter
|
2nd Gear member
Joined: Aug 2006
Posts: 482
From:
Default Please Help 3.1 V6- V8 Swap?

I recently purchased a 91 3.1L V6 Camaro with a Manual Transmission, For Practically nothing...
The Body is in great shape, Brand new tires, Brand New Clutch, 101,000 miles, Fiberglass Turbo hood, The Interior is in mint condition, No visual oil leaks at all... Really quite a steal.
It needs a fuel pump, which is no big deal... considering I only paid $300 for the Car.

Now I understand the basics of A v6 camaro in regards to upgrading performance, Basically Limited to Cold air intake, exhaust, And a Short throw shifter, Nitrous also but meh..
I've seen someone who had their 3.1 Turbo'ed but I assume the means tearing down the block, porting the intake manifold, fabricating custom headers, and swapping pistons.. which in that case if i had the money to do all that i'd buy the T56 tranny instead.

Anyways What I was wondering is.. Is it at all possible to put a TPI motor in or a a carb'd 350 Small block with the manual transmission it has in it now.... I know that in a perfect world a T56 tranny swap would be ideal... But I dont have that kind of cash to spare. So Basically what im asking is, Has anyone done a V8 swap w/ changing trannies? Im thinking more along the lines of a Carbed 350, but i know where i can get a Tuned Port 305 or a Tuned Port 350 for a relatively cheap price. Do you think the tranny could handle the TP 305? Or any Small block for that matter
 
Old Jan 10, 2008 | 03:16 PM
  #2  
94CamaroSFI's Avatar
Thread Starter
|
2nd Gear member
Joined: Aug 2006
Posts: 482
From:
Default RE: Please Help 3.1 V6- V8 Swap?

Doesnt any one have any clue Z28pete, Shnormo? Anyone? Is it Possible!?
 
Old Jan 10, 2008 | 03:20 PM
  #3  
94CamaroSFI's Avatar
Thread Starter
|
2nd Gear member
Joined: Aug 2006
Posts: 482
From:
Default RE: Please Help 3.1 V6- V8 Swap?

Bump. Bump. Bump
 
Old Jan 10, 2008 | 04:16 PM
  #4  
badinfluenceRS's Avatar
4th Gear Member
Joined: Dec 2006
Posts: 1,702
From:
Default RE: Please Help 3.1 V6- V8 Swap?

depends on what you want

you could fab up a turbo setup w/ stock manifolds and a custom ypipe, LOTS of room to work with

you'll need a V8 bellhousing to go on your current 5spd
 
Old Jan 10, 2008 | 04:21 PM
  #5  
z28pete's Avatar
Tech Droid
Joined: Aug 2005
Posts: 9,215
From: North East PA
Default RE: Please Help 3.1 V6- V8 Swap?

With time and money everything is possible. LOL The job should be simpler if you used a donor car and carbed small block. Putting the 5 speed behind a hot V8 is not the best idea, and I am sure there are going to be some issues with bolting the two toghether. If you are going to go with a fuel injected engine, you will need the computer and wiring harnes that goes with that engine.
 
Old Jan 11, 2008 | 01:46 PM
  #6  
94CamaroSFI's Avatar
Thread Starter
|
2nd Gear member
Joined: Aug 2006
Posts: 482
From:
Default RE: Please Help 3.1 V6- V8 Swap?

First Off I want to say That On all the Users of this forums BadinfluenceRS and Z28pete are the most helpful (Shnormo as well but i havent seen him lately)

As for the turbo... Do I have to do any internal mods to the engine? (Im not planning on running a ton of boost) And is there anyone that has a write up or pics of a turbo set up on a 3.1? I ve seen someones video on Youtube so I know it is possible..
What turbo would be reccommended? A Garret T3/t4 hybrid perhaps?

As for the V8.. Yes I can get the computer and wiring harness from the Tuned port 305 /350 as well.
I might be able to purchase a donor Formula TA with the Tuned port 305, With an auto tranny everything runs great, it just has no title. (Don't worry, I know the guy well.. the cars not hot ;p )

Im really kind of leaning towards turboing it.. or whichever is easier.
 
Old Jan 11, 2008 | 02:21 PM
  #7  
94CamaroSFI's Avatar
Thread Starter
|
2nd Gear member
Joined: Aug 2006
Posts: 482
From:
Default RE: Please Help 3.1 V6- V8 Swap?

I actually Found a write up on Turboing a 3.1 on Thirdgen.org heres the link
http://www.thirdgen.org/techboard/v6...ing-turbo.html


 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
3800_seriesII
82-92 Projects
4
Aug 14, 2012 07:24 AM
9434V6
93-02 V6 Tech
38
Sep 8, 2011 11:51 AM
xXChipXx
LT1/LT4 Tech
7
Aug 1, 2010 10:39 PM
miclo88
82-92 General
9
Oct 15, 2009 07:38 PM
85z285.0
82-92 General
1
Jun 2, 2007 03:19 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:50 AM.