Project: killeRS

Thread Tools
 
Search this Thread
 
  #1  
Old 07-16-2008 | 07:23 AM
brassknukl's Avatar
Thread Starter
|
1st Gear Member
Joined: Jul 2007
Posts: 259
From:
Default Project: killeRS

sorry best name i could come up with off the top of my head.
if youve been paying attention you know i was waiting on some $$ to buy a 400sb to swap so heres the project thread finally.

heres what im starting with:

1991 RS 305tbi t5 tranny 3.08 rear (stock)
40 series flow master and some 3 inch pipes already ran.

and heres what i got yesterday:







hers the carb that came with it:
we cleaned it for about an hour and a half but i think im just gonna buy a rebuilt edelbrock.


holley "double pumper" list 4777-2 (old)

engine:
400ci chevy (from a wagon of some sort originally)
already rebuilt/built up.
new heads (w/steamports)
new cam
edelbrock torker intake

heres what im buying:
http://www.jegs.com/p/MSD/761018/10002/-1/76248

http://www.nationalcarburetors.com/h...edelbrock.aspx
bottom of page #1405

any suggestions or things i need to look out for?
ill keep it updated w/pics
 
  #2  
Old 07-16-2008 | 07:55 AM
brassknukl's Avatar
Thread Starter
|
1st Gear Member
Joined: Jul 2007
Posts: 259
From:
Default RE: Project: killeRS

ordered carb:
rebuilt edelbrock #1405
 
  #3  
Old 07-16-2008 | 09:35 AM
Camaro 69's Avatar
Senior Moderator
January 2010 ROTM Winner
Joined: Oct 2007
Posts: 18,306
From: The 'Burbs of Chicago
Default RE: Project: killeRS

Too late now, but IMO that 600 Edelbrock carb is going to be kinda small for that 400 engine. I would have rebuilt the Holley you had, it's a 650.
The formula for a determining carb size is: cubic inches x max engine rpm's divided by 3456 x Volumetric Effeciency (%VE). Very well built engines can reach 100% VE, and real hard-core race engines can actually exceed it. So if your engine is capable of 6,000 rpm, and has a VE of 90% (depending on how the heads are built, etc.) then you would want at least a 625 cfm carb. If your engine breathes better than that, or can wind higher than 6k, then even a 650 would be border-line.
 
  #4  
Old 07-16-2008 | 10:51 AM
brassknukl's Avatar
Thread Starter
|
1st Gear Member
Joined: Jul 2007
Posts: 259
From:
Default RE: Project: killeRS

ok n/m earlier post called and go it swiched to the #1407

your right i didnt even do the math on it.

if anyone wants that holley carb im gonna put it on ebay soon.
just needs to be rebuilt, might even work fine how it is.
PM me ill wait for a few days to list it so i can give CF members dibs if they want it.
also the edelbrock valve covers are going up too.
little bit of rust but my friend assures me we can clean them up before we sell.

idk $40 forcarbOR thecovers to members



 
  #5  
Old 07-16-2008 | 02:11 PM
73camaroSS's Avatar
2nd Gear member
Joined: Mar 2008
Posts: 722
From: Hermiston Oregon
Default RE: Project: killeRS

dang it should be one badass car when you get that 305 out, good call at geting a bigger carb.
 
  #6  
Old 07-16-2008 | 02:14 PM
MadMikeZ28's Avatar
Overdrive Member
Joined: Jul 2006
Posts: 4,248
From:
Default RE: Project: killeRS

Plan on keeping those heads???? Going to keep your serpintine belt system???? There are no accesory holes in them old heads [8D]
 
  #7  
Old 07-16-2008 | 10:47 PM
brassknukl's Avatar
Thread Starter
|
1st Gear Member
Joined: Jul 2007
Posts: 259
From:
Default RE: Project: killeRS

ORIGINAL: MadMikeZ28

Plan on keeping those heads???? Going to keep your serpintine belt system???? There are no accesory holes in them old heads [8D]
fxck fxck fxck
see thats why i put up the thread
cause i tend to overlook things. that wouldve been the last thing i hooked up too.
i guess im gonna have toget the fancy pants brackets and run individual belts huh.
good thing i got another 5k coming in sept.

good call man.

this is sweet between my friends and the forum im gonna have at least 100 people looking over shoulder on my project.
what do you guys think about the gearing? how long do you think that little baby 3.08 or 3.02 or whatever it is and the T5 will last.
 
  #8  
Old 07-16-2008 | 11:13 PM
Camaro 69's Avatar
Senior Moderator
January 2010 ROTM Winner
Joined: Oct 2007
Posts: 18,306
From: The 'Burbs of Chicago
Default RE: Project: killeRS

Are there any accessory mounting holes on the back side of the heads? If there are, you can swap the heads left to right to put the holes in front. Someone may have done that purposely if they didn't intend on using the holes.
 
  #9  
Old 07-17-2008 | 01:25 AM
MadMikeZ28's Avatar
Overdrive Member
Joined: Jul 2006
Posts: 4,248
From:
Default RE: Project: killeRS

ORIGINAL: Camaro 69

Are there any accessory mounting holes on the back side of the heads? If there are, you can swap the heads left to right to put the holes in front. Someone may have done that purposely if they didn't intend on using the holes.
That would be some thing new to me. I have always seen heads with holes in the front and rear for interchangabilty between side. Or without on both ends. But I can admit I have not seen everything so there is a possibilty.
 
  #10  
Old 07-17-2008 | 08:55 AM
brassknukl's Avatar
Thread Starter
|
1st Gear Member
Joined: Jul 2007
Posts: 259
From:
Default RE: Project: killeRS

damn forum probs.
two paragraphs gone.
neway....
no holes on either side
which is better serpentine or individual?
 


Quick Reply: Project: killeRS



All times are GMT -5. The time now is 05:57 AM.