Camaro Forums - Chevy Camaro Enthusiast Forum
Just after I finished washing one day.
Just after I finished washing one day.
0 2010/12/30 12:18:45
It looked so good at the time I had to get a few picks this day. Pic 1
It looked so good at the time I had to get a few picks this day. Pic 1
0 2010/12/30 12:18:45
Pic 2
Pic 2
0 2010/12/30 12:18:45
Pic 3
Pic 3
0 2010/12/30 12:18:45
Pic 4
Pic 4
0 2010/12/30 12:18:45
This was taken right after I brought the car home for the first time
This was taken right after I brought the car home for the first time
0 2010/12/30 12:18:45
New muffler and tips.
New muffler and tips.
0 2010/12/30 12:18:45
This is the guy at the muffler shop who did all the work. He was super nice and really into the job. He took great pride in his welding; this was his favorite thing to do on the job.
This is the guy at the muffler shop who did all the work. He was super nice and really into the job. He took great pride in his welding; this was his favorite thing to do on the job.
0 2010/12/30 12:18:45
Another shot of him working.
Another shot of him working.
0 2010/12/30 12:18:45
This is the snow I knocked out from in front of my radiator after driving down an uncleared road after a snowstorm.
This is the snow I knocked out from in front of my radiator after driving down an uncleared road after a snowstorm.
0 2011/05/17 10:37:06
Yes, the bump stop IS actually still in in this shot.
Yes, the bump stop IS actually still in in this shot.
0 2011/05/17 10:37:06
New bump stop.
New bump stop.
0 2011/05/17 10:37:06
What was left of the bump stops.
What was left of the bump stops.
0 2011/05/17 10:37:06
SS sways painted and ready.
SS sways painted and ready.
0 2011/05/17 10:37:06
Old stuff
Old stuff
0 2011/05/17 10:37:06
Old spring
Old spring
0 2011/05/17 10:37:06
Old stuff
Old stuff
0 2011/05/17 10:37:06
Old sway
Old sway
0 2011/05/17 10:37:06
Sway bar out.
Sway bar out.
0 2011/05/17 10:37:06
Garage shot
Garage shot
0 2011/05/17 10:37:06
Comparison shot
Comparison shot
0 2011/05/17 10:37:06
I painted the link mounting brackets with POR-15 before reinstalling.
I painted the link mounting brackets with POR-15 before reinstalling.
0 2011/05/17 10:37:06
19mm bar installed
19mm bar installed
0 2011/05/17 10:37:06
Other link.
Other link.
0 2011/05/17 10:37:06
New are just a tad bit bigger. ;)
New are just a tad bit bigger. ;)
0 2011/05/17 10:50:30
Driver side rear after.
Driver side rear after.
0 2011/05/17 10:50:30
Passenger side rear after.
Passenger side rear after.
0 2011/05/17 10:50:30
Front sway out
Front sway out
0 2011/05/17 10:50:30
Bent front link
Bent front link
0 2011/05/17 10:50:30
Comparison
Comparison
0 2011/05/17 10:50:30
Old setup
Old setup
0 2011/05/17 10:50:30
Old setup
Old setup
0 2011/05/17 10:50:30
Old setup
Old setup
0 2011/05/17 10:50:30
Old setup
Old setup
0 2011/05/17 10:50:30
Passenger assembly and control arm
Passenger assembly and control arm
0 2011/05/17 10:50:30
Driver assembly and control arm
Driver assembly and control arm
0 2011/05/17 10:50:30
This was a problem... had to take to my mechanic and they hacked it off with a hammer chisel. The upper mount was too far gone though, so I had to get a new one for passenger side.
This was a problem... had to take to my mechanic and they hacked it off with a hammer chisel. The upper mount was too far gone though, so I had to get a new one for passenger side.
0 2011/05/17 10:50:30
Even though they weren't really bad, I replaced the upper ball joints since everything was all apart.
Even though they weren't really bad, I replaced the upper ball joints since everything was all apart.
0 2011/05/17 10:50:30
Other old ball joint drilled and popped out.
Other old ball joint drilled and popped out.
0 2011/05/17 10:50:30
Control arms painted with POR-15.
Control arms painted with POR-15.
0 2011/05/17 11:25:52