We all race so put ur stories up here!! I'm getting tired of readig the same ones over and over!

Post up one iroc!!! I've got a 98 z28 with a cutout exhaust, with random technology mufflers. lid, and some other little nonsense wanting to run me. I just smile :D

ORIGINAL: Hisss04Cobra

Post up one iroc!!! I've got a 98 z28 with a cutout exhaust, with random technology mufflers. lid, and some other little nonsense wanting to run me. I just smile :D

He might be a good race for you if you are still stock. I ran a LT1 car the other day and had it by 2 or 3 cars by the top of second when I lifted. I don't really ever bother to write my kills, they are few and far between.

i have a story but its not very exciting. me and my dad were driving down the highway doing about 55. a red like 98 or 2000 firebird pulls up next to us. we didnt really look at each other, but we new it was competition. so the guy next to us would bolt forward, and then slow down. so finally my dad just floored it, and so did he. we smoked him.

Firebird is a v6....what are you?

i have plenty, but its pointless

ORIGINAL: Hisss04Cobra

Firebird is a v6....what are you?

Firebird Formula's are LS1's though.

my car doesnt kill anything anymore.

oh yea well that explains it, ive got a stroked 8. i knew they had a six but do they also have an 8 for them?

your car has a stroker?

350 block, stroked to a 383. we are keeping it kind of weak at the moment because we havent done any tranny work or rear end work to be strong enough for it. but this spring weve got some good plans for it.

I never respond to any challenges on the street, no matter how. I'm 56 and the last time I raced on the street, even for a second or two, was about 20 years ago. It just can get you into so much trouble, so fast. I know (knew) one guy who killed himself at 22, have seen others end up hurt, or in jail, or both. Street racing is just a prescirption to get in big trouble very fast. Takes a lot of discipline, but we have fun anyway.

We have QTP electric cutouts on both the 'vette or the Camaro and they are about the most entertaining thing on the cars. I often have fun at a light - little rice burner will pull up alongside and pipe me or my son and we just open the cutouts while keeping it at idle and then blip the throttle good -- its gets LOUD. Scares them.

The most fun is when my youngest son and I go out together cruising at night in the Camaro and the 'vette. Two LS engined cars with a combined 1300 RWHP. As the Beach Boys said, "The bad guys know us and they leave us alone."

Wow cutouts on a Camaro sound beautiful. I'd really love to hear it on a z06!!!

The Camaro actually sounds better. On the vette, things are so tight thatwe could only fit them back about halfway down the exhaust near the back of the H pipe: they are behind the cats and about 3 feet of pipe, and the vette has a rather mild street cam (Crower custom grind, 230-236 with only .594 lift. It is loud and raspy with the cutouts open, but the Camaro has the cutouts right at the ends of the header collector tubes, and it has a really radical big cam and it just sounds like thyunder with them open.

I like monster trucks, i've decided I need their exhaust. Just run me some open headers.

Actually, it is cool to have a quiet car. The 'vette is surprisingly quiet most of the time: with the cutouts closed it is quiet. Porblem is that dyno testsindiucate "quiet"costs 29 RWHPm- 565 closed (through the mufflers) versus 594 RWHP with the cutouts open. Actually, I cant; tell the difference from inside the car, although it makes about .1 seciond diference in timed runs.

But tjhe Porsche is very cool aqnd people don't give them credit: it came from the factory with a "sport exhaust" that has a switich on the dashboard. Hit it to turn it "off" and the engine is quiet as a V6Accoard, leave it on and the back half of the mufflers are cut out, ad its raspy and loud::: i turn it on each morning before heading to work at 6:30 -- figure it helps the neighbors.

I had it dynoed and the "loud" mopde, with the mufflers cut outk, adds on 4-5 RWHP, but, every bit helps.

ahha i actually got replies!! ya i dont have a car yet lol i take my license test a week from today though!! but today i saw my dream car it was AWESOME.. It was a 1968 Z28 camaro MINT. it was for sale but the guy wanted $38500!! a lil above my price range. But this summer i have a job commercail fishing in alaska so i hope to make like 10K then buy lik ea 68 camaro that is pretty nice. any pointers?

1st pointer don't buy the first thing you see. Possibly the best pointer you will recieve. Patience is oh so much of a virtue...

A '68 Camaro as a first car? You have good taste MYIROCPLX. I love '68s - they are good looking after all these years, light, and when well-restored, delightful to drive. The first new car I ever bought was a '68 327 Camaro and I am particularly fond of them for that reason.


Frankly, I'd wait until you are in a position to spend what it will cost to make run safe and well. Owning one that runs and is reliable will not be cheap. I'd strongly recommend something like a 95-96 Camaro: a lot newer, easier to get the right parts for it, and much less trouble to find parts that fit.

All manner of very expensive things are wrong on any but a restored 37 year old car - in additional to all the things that you would think of: drive train, electrics, radiators, bushings, tie rod ends, steering gears, etc., etc., etc., things you don't think of are worn: the brake lines are likely shot (yes, eventually brake lines wear out): it takes skill and money, or money and more money to hire someone skilled, to do it right, and you can't mess around with it -- breakes are critical. The actual wiring harness throughout the car will likely also be shot (they ususally are when the car gets to be about 40 years) and the whole harness might need to be replaced or you will spend the next few years with one maddening electrical glitch after another. Repl;acement is not terribly expensive (under $2K for all the parts), but takes a lot of effort and patience, AND a place where you can just leave the car for weeks as you slowly go through replacing all the wires, the sockets, the clips, the fittings, etc. ((Or again, you can hire it done, but that IS expensive).

Finally, if you buy a '68 you should set aside some money for parts that won't fit, and make sure you know someone REALLY knowledgeable on chevys. After 37 years any Camaro you can afford will have been repaired/upgraded/re-fitted with some later parts: when you go to repair or replace your car, you'll buy the part you think should fit only to find that no, somewhere along the line someone upgraded that and it needs a different part - but which one? Anything from about 1963 through 1990 would fit, and you just never know: finding out is costly and requires real saavy. Example: the rear main seals on the engine (even a exactly stock looking engine) could be any of several types, depending on if and when someone dropped a replacement or had it rebuilt: anything from '63 through about mid to late 80s would fit and you just don't know. This will be particularly frustrating.

Lee, didnt you say that you had a 68 once.

Two kids killed themselves 9 months ago in my town for going 120 with nos around a sharp turn, They were drunk and hit a tree. I know what you mean.

I AM IN THE MIDDLE OF BUILDING A 383 LOOKING TO MAKE 575HP AND 480 LBS, ACCORDING TO THE DYNO SHOULD BE PRETTY NICE.

ORIGINAL: mattvogt

Lee, didnt you say that you had a 68 once.

Two kids killed themselves 9 months ago in my town for going 120 with nos around a sharp turn, They were drunk and hit a tree. I know what you mean.


My first new car was a 68 327 Camaro I bought in March of 68. It was a gold/green color (not that good a color, but), and all I could afford and I was on a shoestring modifying it but tried. I customized the front abit and put better wheels and tires on it, mostly used headers and manifolds and all. It was fast but not that fast.
But I had a lot of adventures in it. Beat a 390 cubic inch Mustang "California special" in a really tough street grudge match, by half a length and for $250, which was a lot, to me, back then, with all my friends there to see: still one of the glory moments of my life. 1968 Camaro V8s had a flaw from the factory (it was one of the first big factory recalls) but I was clueless at the time: the throttle linkage could come loose and flip wide open, but it only happened during a sharp left turn: I did a complete 360 into a median with wheels spinning and motor roaring and a (very soon to be ex-) girlfriend in the car and bent two wheels.
And there was the night my buddy and I picked up two really hot girls who loved the car, and took them to a bar -- only to find out as we were taliking that their dad was a drill sergenat in the Army who was really overprotective of them and they had snuck out the back window while he was getting ready for his date that night, and then he walked into the bar with his girlfried, a half hour later -- not pleasant. And there was the time when I was hauling butt northward in the middle of the Texas panhandle, good weather and the middle of the week, to visit family in Colorado, alone, doing about 100 mph, when out of nowhere this red "thing" passes by me like I was standing still -- to this day I don't know what it was. Red, low, dual duals on the rear, and a real scream from the engine. Probably Itlaian and expensive.
I traded it in 1973, on an Oldsmobile Cutlass sedans for a very pretty blond schoolteacher I loved at the time. I don't have the blond anymore, which is fine, but I sure wish I had that Camaro.