93-02 V6 Tech V6 Camaro General Topics.

3.4 SFI V6 Specs 93-96 Camaro from GM DOCUMENTATION

Thread Tools
 
Search this Thread
 
  #1  
Old 08-22-2006, 05:30 PM
94CamaroSFI's Avatar
2nd Gear member
Thread Starter
Join Date: Aug 2006
Location:
Posts: 482
Default 3.4 SFI V6 Specs 93-96 Camaro from GM DOCUMENTATION



93-96 V6 Camaro Spec Sheet
Driver And Passenger Air Bags (93 Camaro was Chevrolet's first car with Passenger Air Bags) Four Wheel ABS, PASS-Key II Anti Theft System. ScotchGard Fabric Protector on seats and Door panels,Composite Body Panels Dent resistant and rust proof to keep this vehicle looking showroom new for many years (body wise)


L32 3.4 Liter V6 (207 Cu Inch)

60 Degree front Longitudinal, OHV
Bore:92.029 mm
Stroke 84 mm
Cast Iron block
Firing order 1-2-3-4-5-6
L (Front to Back ) 2-4-6
R 1-3-5
Horsepower:160
200 ft/lbs of torque
Knock Sensor Located Right Side Center of Block
Compression Ratio 9.0:1
Fuel: 87 octane
Fuel Tank Capacity= 15.5 Gallons
Total Engine Mass : 452 Lbs (Auto) 492.8 Lbs (Manual)

Sequential Fuel Injection
Computer Controlled Air/Fuel Ratio
Electronic Pulse (injection)
Cast Iron Block (29 Lbs)
Aluminum Intake Manifolds
Normal Oil Pressure:50-65 psi

Transmissions

Manual (M49)

Gear Ratios:
1st 3.75
2nd 2.19
3rd 1.41
4th 1.00
5th 0.72
Reverse 3.53
Use DexronII lubricant (2.8 L capacity)

Automatic aka Hydra-Matic 4L60E

4 speed Auto w/ Overdrive(4th gear Overdrive, Lock Up Torque converter Clutch)

1st 3.06
2nd 1.63
3rd 1.0
4th 0.70
Reverse 2.29

MAXIMUM Upshift speed: 1st-2nd=37 mph, 2-3=70 mph, 3-4th= N/A Above 56% throttle, Will not Make WOT 3-4th

MAXIMUM Upshift Engine RPM: 5200

Axle Ratio (Both Manual and Auto) 3.23

No. of Teeth- Pinion= 13 Ring Gear=42


COOLING SYSTEM

Thermostat Opens Coolant at 195 degrees F.
Single Fan ECM Controlled, RPM at Idle 1800-2000
Fan Switch point = 226 degrees F

Exhaust System
2.5" Single Exhaust All Stainless Steel
Single Catalytic Converter located underneath passenger seat


EXTERIOR DIMENSIONS

(In inches)
WHEELBASE=101.1
LENGTH(overall)=193.2
WIDTH=74.1
HEIGHT= COUPE 51.3, CONVERTIBLE=52.0
FRONT BUMPER TO GROUND CLEARANCE=5.1"
REAR BUMPER TO GROUND CLEARANCE= 13.7"



FRONT SUSPENSION
Independent W/ Coil Springs,SLA (Short/Long Arm W/ Coil Over Shock, Gas Charged Shocks.

REAR SUSPENSION
Salisbury Axle W/ Torque Arm,Trailing Arm,Track Bar, Coil Springs


Wheels And Tires
P215/60R-16 (STANDARD ON SPORT COUPE)
P235/55R16(STANDARD ON Z28; OPTIONAL FOR SPORT COUPE)
Rim Size
Cast Aluminum
16x7.5
16x8 (OPTION FOR SC, Z28 rims)

STRUCTURE
Full Unitized Steel Construction. Cowl,Roof,Underbody,And Body Panels Welded To Form Body Shell. Doors,Roof,And Hatch Lid Double Panel Construction

Total Glass Exposed Surface: 4,846.745 square inches. Convertible= 3,039.895 Sq In.

Lo-Beam Type:H4351
High Beam Type:H4352


Peace, and Godspeed
Aaron
94CamaroSFI
 
  #2  
Old 08-22-2006, 11:15 PM
JaySan's Avatar
2nd Gear member
Join Date: Jun 2006
Location:
Posts: 375
Default RE: 3.4 SFI V6 Specs 93-96 Camaro from GM DOCUMENTATION

Do u no the specs. for a 98+ camaro's?
 
  #3  
Old 11-08-2010, 10:31 PM
QuadMan91's Avatar
Newbie
Join Date: Nov 2010
Posts: 3
Default

How much horsepower ad torque does a stock 1994 3.4 SFI camaro get to the wheels?
 
  #4  
Old 11-08-2010, 10:45 PM
BasicConcepts's Avatar
Overdrive Member
Technical User
Join Date: Oct 2009
Location: Greenville, South Carolina
Posts: 4,597
Default

a 94 now like 130 maybe age reduces HP
 
  #5  
Old 11-08-2010, 10:46 PM
WIspartan1026's Avatar
May 2013 ROTM
ROTM Winner's Club
Join Date: May 2009
Location: Farmington Hills, MI
Posts: 1,670
Default

stock crank hp: 160

wheel ~140ish.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
santa6
93-02 General
1
10-22-2014 10:20 AM
RaiderGT
93-02 General
2
11-06-2012 06:16 PM
Calwooz
93-02 General
1
03-18-2012 10:03 PM
Petepd
67-69 General
0
01-18-2012 07:14 PM



Quick Reply: 3.4 SFI V6 Specs 93-96 Camaro from GM DOCUMENTATION



All times are GMT -5. The time now is 07:39 AM.