Project 93

  #31  
Old 05-10-2015, 06:40 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,350
Default

Drove it today, Course it is way out of alignment. It is not tagged or insured so it was just a couple of shake down trips around the block. Still have a lot of work. Steering column needs to come a part because of the classic looseness. I am going to need to do a heater core and I am not sure if I will risk wasting the refrigerant or if I just go with a new AC compressor. It needs some paint work on the roof and drivers door. Also the radio looks like a nightmare. I need two new tires for the front.

Finally off the lift!!!
Name:  93%20Camaro%20eunning_zpsx8asoegn.jpg
Views: 137
Size:  231.1 KB
 

Last edited by Gorn; 05-10-2015 at 07:07 PM.
  #32  
Old 05-11-2015, 07:14 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,350
Default

I was checking out the radio. It looks like the PO added a bunch of wires for upgrades which made it look bad, I plugged in the monsoon system and it worked great. monsoon system would not have come stock in the 93?
 
  #33  
Old 05-12-2015, 11:19 AM
craby's Avatar
April 2011 ROTM
ROTM Winner's Club
Join Date: Mar 2009
Location: Tokeland, Washington
Posts: 21,637
Default

book shows base and bose only
 
  #34  
Old 05-12-2015, 06:37 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,350
Default

Stereo has a 2000 manufacture date.
Started a thread, too many question for a build thread few look at.
https://camaroforums.com/forum/93-02...eo-help-78725/
 
  #35  
Old 05-19-2015, 06:35 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,350
Default

Sure is nice to drive it around, It is back in the garage. Heater core replacement and steering column repair, I also need to figure out on the plastic parts on the front end and the AC system. 4 day weekend coming up.

Back on the lift, I know it just a body shop mid lift but it sure is nicer working on door panels standing up

Name:  IMG_20150519_175209_zps7suhmvih.jpg
Views: 66
Size:  159.6 KB
 

Last edited by Gorn; 05-19-2015 at 07:17 PM.
  #36  
Old 05-19-2015, 07:47 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,350
  #37  
Old 05-22-2015, 02:53 PM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,350
Default

New shoes for the front!
Name:  Front%20tires_zpsnfobxcsp.jpg
Views: 194
Size:  293.2 KB
 
  #38  
Old 05-22-2015, 04:01 PM
Camaro 69's Avatar
Senior Moderator
January 2010 ROTM Winner
Join Date: Oct 2007
Location: The 'Burbs of Chicago
Posts: 18,306
Default

Nothing like getting new shoes! Nice wheels too.
 
  #39  
Old 05-23-2015, 12:03 AM
craby's Avatar
April 2011 ROTM
ROTM Winner's Club
Join Date: Mar 2009
Location: Tokeland, Washington
Posts: 21,637
Default

racing stripes are good for 10 hp
 
  #40  
Old 05-23-2015, 07:27 AM
Gorn's Avatar
Fourth Generation Moderator
October 2009 ROTM
ROTM Winner's Club
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Eastern PA,
Posts: 10,350
Default

Originally Posted by craby
racing stripes are good for 10 hp
I gutted the cat already and everyone knows if I add racing strips it will just blow the rear.
 

Thread Tools
Search this Thread
Quick Reply: Project 93



All times are GMT -5. The time now is 04:40 PM.